HN-300N One-Component Room Temperature Cured Silicone Adhesive Sealant For O-rings

PRODUCT DESCRIPTION

HN-300N is a silicone adhesive that is used for cured silicone rubber products bonding at room temperature.

Especially suitable for bonding silicone to silicone.

* Product Features *

1, High and low temperature Resistance（-60~200℃）

2, UV and ozone resistance

3, Excellent insulation property.

4, None whity, never grow hard.

* Product Applications *

※ All kinds of silicone seals, gaskets and O-rings.

※ Insulation for various electronic components.

※ Silicone spare parts

TECHNICAL PARAMETERS

※ Standard Description

HOW TO USE

* How to use *

1. Cleaning the surface to be bonded.

2. Coating adhesive thickness≤1mm.

3. At least 30 minutes of pressing, the adhesive is cured completely after 24 hours at room temperature.

* Attention *

1. Need to clean the surface to be bonded and avoid the greasy dirt.

2. Make sure uniform pressure to keep bonded parts together.

3. KN-300N is easy to cure once contact with moisture, it must be stored in completely sealed packaging and away from light and heat.

4. Avoid eye contact with the adhesive, If contact, rinse with water immediately, then go to see the doctor.

5. Please fasten down the caps after use to avoid the gel to be cured.

PACKING

* Packing *

    100g / PC

    310g / PC

- Storage : Shelf life for 3 months, stored at 20℃-25℃ dry place, away from light and heat.