Silicone potting adhesive HN-8808AB

Organosilicon potting adhesive series products have a number of two-component organosilicon potting adhesive models. The gel is soft and elastic after curing, which can protect the product from impact. It has the properties of insulation, cold and hot alternating resistance, repair, etc. It is one of the commonly used electronic potting adhesives.

Application industry:
Medical devices, automotive electronics, communication equipment, electrical engineering, instruments and meters, new energy
Product application:
Electronic components, solar energy, backlight, electrical module

usage method

Application method of organosilicon ab potting adhesive
Operating time: 100G mixing capacity at 25 ℃, operating time: 40 minutes
Curing time: 6-8 hours for surface drying, 24 hours for complete curing
1. Before use, make sure to mix A/B evenly (agent A has been placed for a long time, and there is filler at the bottom),
2. The electronic scale in use shall be weighed according to the correct weight ratio,
3. After AB is mixed and stirred evenly (it should be stirred in the same direction clockwise and at a constant speed),
4. After mixing and stirring evenly, the exhaust bubble can be filled into the product after a few minutes of rest, and the glue will gradually penetrate into the gap of the product. If necessary, it can be filled again.

matters needing attention

Precautions for organosilicon ab potting adhesive
1. After mixing, AB will gradually solidify, gradually thicken and release a certain amount of heat.
2. The more the mixing, the faster the reaction, the shorter the operation time, and a large amount of heat will be released. Please pay attention to control the amount of glue at one time
3. It is recommended to wear protective gloves and wipe with alcohol or acetone if it is stuck to the hands.
4. Before mass production, pilot production in small batches should be carried out to master the use skills of products to avoid mistakes.
5. The product is stored in a cool and dry environment at 25 ℃, with a shelf life of 9 months. It can continue to be used after expiration and passing the test.