How to use 704RTV glue for fixing and bonding white glue for electronic components

Instructions
First clean the components to be glued to remove the oil on the surface, then squeeze out the product from the tube and apply it on the surface of the components. The glue will gradually solidify from the surface to the inside when it contacts the moisture in the air. elastomer. When in use, the adhesive layer must be fully in contact with the air. The larger the contact area, the faster the curing, otherwise it will be slower or even not cured. The thicker the adhesive layer, the longer the vulcanization time, silicone sealant adhesive various application, the greater the humidity and the higher the temperature in the same environment, the faster the curing speed of the adhesive layer. The opposite is the opposite. After the product is used, the hose should be tightly capped immediately, and it can be stored for reuse. For automatic production lines, pneumatic glue dispensers can be used to apply glue.