Two-Component 10:1 Silicone Encapsulant Waterproof RTV-2 Slicone Potting Rubber Potting Material For LED Driver

PRODUCT DESCRIPTION

HN-8808, two parts, low viscosity potting compound that cures at room temperature to soft rubber.

1. This potting silicone rubber has high moisture resistance and a wide temperature range of - 57°C to 250°C.

2. Condensed liquid silicone rubber does not use polar compounds as raw materials, and does not release by-products during cross-linking, and can maintain better electrical properties under harsh conditions.

3. Non-toxic, odorless, non-corrosive, non-swelling.

4. It has adhesive force, has adhesion to metal aluminum, iron, acrylic, and PC plastic, and can improve waterproof sealing performance.

PRODUCT APPLICATION

* Product Application *

Widely used in sealing, electrical, potting, insulation, antifouling, waterproof, shockproof, coating, electronic appliances, and comprehensive household appliances.

TECHNICAL PARAMETERS

* Technical Parameters *

№	Itrems	Technique Request
1	Appearance	Transparent, White, Black Flowing Liquid
2	Viscosity (before curing) (mPa.S）	A：2000 B:50
3	Specific Gravity (23℃)	0.98
4	Available Time (h, 25℃)	1-2h
5	Entirely Cure Time (h, 25℃)	8-12h
6	Shaw Hardness (JIS A)	25A
7	Volume Resistivity (Ω cm)	≥1×1014
8	Strength of Breakdown Voltage (kv / mm)	18-25
9	Dielectric Constant (1MHZ)	2.5 - 3.0
10	Dielectric Loss Angle Tangent (1MHZ)	≤4×10-3
11	Thermal Conductivity (w / m.k)	0.1 - 0.20

* Noted:

1. Parameters can be adjusted as required.

2. The data in this product description are non-standard values.

3. Test first before using.

HOW TO USE

* How to use *

According to the dosage, pour it into the mold after mixing according to A: B=10:1.

Remove the surface bubbles and cure at room temperature (the proportion can be adjusted according to actual needs, the larger the proportion of component B, the faster the curing).