How to use room temperature curing electronic potting adhesive?

The natural curing electronic potting adhesive used for electronic product potting is room temperature curing electronic potting adhesive. It has thermal conductivity, excellent insulation, waterproof, and corrosion resistance after curing, and can provide good protection for electronic equipment; To realize its ideal value, it is necessary to master the correct usage method. Next, I will teach you how to use room temperature cured electronic potting adhesive.
1. Before use, make sure to mix A/B evenly (agent A has been left for a long time and there is a filler at the bottom),
2. Weigh with an electronic scale at a weight ratio of 10:1,
3. Mix and stir AB evenly (stirring should be done clockwise and at a constant speed in the same direction),
4. After mixing and stirring evenly, let the exhaust bubble stand for a few minutes to seal the product. The glue will gradually penetrate into the gaps of the product, and if necessary, a secondary glue filling can be carried out. Fully cure within 24 hours.

After using the room temperature curing electronic potting adhesive, please cap the bottle and store it in a cool and dry place at 25 degrees Celsius to avoid direct sunlight. If the storage time is too long, it is recommended to conduct a test before use. If the test is qualified, it can be used again.