The Manufacturing Method of Silicone Mold Pouring Mold and Slicing Mold

Slice mold or sheet mold operation method: Apply or pour vacuum filled silicone for construction. If you are making a wafer mold or a wafer mold using a brushing method, first apply a layer of release or isolation agent to the product or model you want to copy before brushing, addition cure silicone rubber and then apply silicone gel to the product (note: it must be evenly applied). addition curing silicone Wait for 30 minutes, then stick a layer of gauze or fiberglass cloth on the surface to increase strength, and then apply a second layer of silicone gel. After the silicone gel dries, make the outer mold, The external mold can use materials such as gypsum or resin.

The operation method of injection mold or injection mold: Injection mold or injection mold is used for relatively smooth or simple products. It is to enclose the product or model you want to copy with a rubber or glass plate, pour the vacuum filled silicone directly onto the product, wait for the silicone to dry and form, and then take out the product, The mold is formed (note: injection molds usually use soft silicone to make the mold, which is easier to demould and will not damage the products inside the silicone mold). The above is the entire process of using and operating silicone in the mold.