Home
What is the effect of potting glue?
1. Avoid direct exposure of components and lines, and improve the waterproof and moisture-proof performance of components;
2. Strengthen the integrity of electronic devices and improve the resistance to external shocks and vibrations;
3. Improve the ins
Jan 07,2023 
What are the uses of potting glue?
It is widely used in precision electronic components, solar energy, backlight, electrical modules and other industries, and is an indispensable and important insulating material in the electronic industry.
Jan 07,2023
Some glues have solidified, while some glues have not solidified or are not completely solidified
Cause: If this problem occurs during the use of potting adhesive, it is usually caused by uneven mixing
Jan 07,2023
Bubbles after potting adhesive curing
Cause: If bubbles are found after curing during the use of potting adhesive, it is usually because the gas does not overflow or disappear from the liquid glue
Jan 07,2023
The curing time of potting adhesive is too long
Cause: If this problem occurs when the proportion is accurate and the mixture is uniform, it is likely that the curing temperature is too low. One of the characteristics of two-component potting sealant is that it is greatly affected by temperature. The h
Jan 07,2023
Dehydration does not cure, the cured resin is too soft and the surface is too sticky
Cause: This problem occurs during the use of potting adhesive, which is generally caused by inaccurate or uneven mixing ratio of two components
Jan 07,2023
After potting, there are bubbles inside. After curing, the surface is not smooth, uneven, and looks dull and has no luster.
First, air bubbles are brought into the glue solution during the glue mixing or filling process because of the high viscosity of the glue or the wrong mixing method. If the glue solution has high viscosity, it is difficult to eliminate the bubbles. If the
Jan 07,2023
Some glues have been cured, and some glues have not been cured or are not completely cured.
Uneven mixing and long storage time of glue A cause the filler to sink to the bottom, resulting in imbalance of proportion. The filler is not stirred or not stirred evenly before use.
Jan 07,2023
What is the reason why the potting adhesive is soft after curing, which should be hard adhesive?
Incorrect ratio of potting adhesive and curing agent: if the ratio is not made by weight or the deviation is large (this may happen if there are more or less curing agents)
Jan 07,2023
You May Also Like
Tel
Email
Address
1210, Block B, Building 6, Hengda Shishang Huigu, Shenzhen, Guangdong, China
candy
Whatsapp
