Precautions for using silicone glue

The biggest advantage of silica gel glue is that it is soft and has good light transmission. In advance, the color is transparent. Transparent silica gel glue is generally used for silica gel bonding. It is resistant to acid and alkali corrosion. It also has good effect for outdoor products. It is divided into single component silica gel glue and two-component silica gel glue. It can withstand high temperature, generally around 300 degrees. Moreover, the curing time depends on the bonding area of the product, The small area solidified in more than ten minutes, while the large area took a little longer.

1. Do not wear woven gloves. Gloves made of this material will be absorbed by silicone rubber glue and polymerize. During the reaction, high heat will be generated, which may hurt the hands of the construction personnel and is not safe.
2. In case of splashing into eyes, eyeballs will be injured after solidification. At this time, do not knead, rinse with water, or apply with a warm towel. When the eyelids are moist, you can open your eyes. If the situation is serious, it is recommended to seek medical advice immediately.
3. Silica gel glue is somewhat irritating, and good ventilation shall be maintained during the construction to prevent the volatilized substances from harming workers.
4. In case of leakage, the silicone rubber glue shall be completely cured and then cut off with a knife, which will not affect the next use