How about the performance of electronic potting adhesive? What should be paid attention to during the filling and sealing process?

Electronic potting adhesive is a potting adhesive material made of silicone rubber, including one-component agricultural production system silicone potting adhesive and two-component agricultural production system silicone potting adhesive. The cured material can resist the mechanical impact and cold and hot impact of the parts; It can work at - 50 to 250 ℃ for a long time; It is suitable for potting and processing of highly accurate/sensitive electronic equipment in various harsh environments.

Advantages of electronic potting adhesive:
1. Low viscosity, good fluidity, suitable for potting complex electronic parts.
2. After curing, it forms an elastic rubber shape with good impact resistance.
3. Heat resistance, moisture resistance and cold resistance can extend the service life of electronic accessories after application.
4. Curing at room temperature and heating
5. It has moisture-proof, waterproof and insulation effects.

Use method of electronic potting adhesive:
1. Before mixing, first mix components A and B in their respective containers.
2. When mixing, observe component A: component B=1:1 (weight ratio), fully stir and mix evenly, and it is recommended to vacuumize and remove bubbles in the glue before use.
3. Fill and seal the evenly mixed rubber into the parts under the condition of keeping the filling part clean and dry. The potted parts shall be cured at room temperature, and can enter the next process after initial solidification.
4. The curing speed will be faster if the summer temperature is high; The curing speed will be slower when the temperature is low in winter.