Home
Can the shelf life of mold silicone rubber be extended?
Taking the common condensation type 100:2 and addition molding 1:1 silicone as an example, starting from the manufacturer's production packaging, it is recommended to use it within 6 months, with no impact on performance and high usability. But if it exceeds 6 months, it is not that it cannot continue to be used. It is just that there may be precipitation and an increase in viscosity of the colloid. Therefore, when using it, it is necessary to separately stir the colloid evenly and then mix it in proportion.
Apr 14,2023 
How much heat can the addition molding of AB potting adhesive conduct?
How much heat can the addition molding of AB potting adhesive conduct? The thermal conductivity is between 0.8 and 2.0, with a maximum thermal conductivity of 2.0. If there are special requirements, the thermal conductivity can also be increased.
Apr 14,2023
Do you have a faster drying adhesive like 502?
Single component room temperature curing silicone, which is cured from the surface to the inside after contact with air, with a curing rate of 4mm within 24 hours
Apr 13,2023
What are the products you currently produce?
At present, our main product is single component room temperature curing adhesive. There are also two component room temperature vulcanization, two component heating cured silicone, potting adhesive, thermal potting adhesive, thermal silicone grease, etc.
Apr 13,2023
Can you provide samples for testing?
Yes, we can provide free sample testing for all our products as long as customers have such needs, and customers only need to pay for the courier fee.
Apr 13,2023
What is the minimum order quantity for your company's products?
We have a wide variety of product models, and relatively commonly used products have inventory. There is no minimum requirement for order quantity. If it is some non universal products, we will have reasonable requirements, such as 100ml, the minimum quan
Apr 13,2023
What certifications do your products have and do they meet environmental standards?
Our company produces products with raw materials provided by the largest material supplier in the industry. We conduct periodic inspections on each batch of materials and provide corresponding material certificates and inspection reports. Our products com
Apr 13,2023
Why did the lamp beads turn black after using glue
We often encounter lamp beads turning black, which leads to the overall brightness of the lamp and causes significant losses to customers. There are only two reasons for the lamp beads turning black. The voltage is too high, and the glue inside the lamp b
Apr 13,2023
Mold silicone operation precautions
Usage of mold silicone:
1. After weighing a certain amount of silicone, add a curing agent of 2-3% of the silicone amount, and make it ready for use and must be used up in a short period of time.
2. Mix the adhesive with the curing agent thoroughl
Apr 13,2023
You May Also Like
Tel
Email
Address
1210, Block B, Building 6, Hengda Shishang Huigu, Shenzhen, Guangdong, China
candy
Whatsapp
